Jabsco Impeller Kit – 10 Blade – Nitrile – 1-19/32″ Diameter

Diameter:1-19/32″
• Shaft Width:5/16″
• Shaft Diameter:3/4″

Insert Material:Brass

Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Jabsco flexible impellers can be applied to most brands and models of bronze flexible impeller engine cooling pumps, bilge pumps, transfer pumps and general pumps. Jabsco flexible impellers undergo strict quality control to ensure reliable, efficient and long-lasting performance. Replace all impellers at least once a year or earlier, depending on the engine load. If installed correctly, the impeller may last for several years, but it is always recommended to follow a preventive maintenance plan instead of corrective maintenance. It is easy to replace the impeller. By removing the end cap screws, the Jabsco impeller removal tool or channel locking pliers can be used to remove the impeller to grasp the hub of the impeller. Do not use screwdrivers, as they may damage the surface of the pump body, cause leakage, and may be dangerous in confined spaces. In an emergency, please be sure to bring a spare impeller on board. The impeller is one of the most important components of the engine cooling system and should always be treated as such. Always grease new impellers. First, it makes it easier to install the impeller into the pump hole; second, it provides extra protection for the impeller during initial filling. After replacing the gasket and end cap, the pump can be used. Material: Nitrile. Drive type: single plane drive. Number of blades: 10. Diameter: 1-19/32″. Shaft width: 5/16″. Shaft diameter: 0.75 inches. Insert material: brass. !!!!—-
PRODUCT ID: 50254
SKU: NVN-50254
CSKU: CWR-50254
REWRITE: 61365-jabsco-impeller-kit-10-blade
MPN: 9200-0023-P
UPC: 671880591867
ASIN: B000O8B5XY
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-92000023P
NAME: Jabsco Impeller Kit – 10 Blade – Nitrile – 1-19/32″ Diameter
NAME_EX: JABSCO IMPELLER KIT NITRILE 10 BLADE 1 19/32 DIA X 3/4 W
PTITLE: Jabsco Impeller Kit – 10 Blade – Nitrile – 1-19/32″ Diameter
TYPE: Marine Plumbing & Ventilation | Impellers
VENDOR: Jabsco
Google Category: VEHICLES & PARTS > VEHICLE PARTS & ACCESSORIES > WATERCRAFT PARTS & ACCESSORIES
Amazon Category: Sports
Amazon Title: Jabsco 9200-0023-P, Nitrile, Drive Type 4, 10 Blade, 1-19/32 Diameter, 3/4 Width, 5/16 Shaft, Brass Insert
Google Title: Jabsco Impeller 10-Blade Kit, Nitrile, 1.6″
Amazon Category: Sports
Gtags:

GSpecs: