FREE SHIPPING FOR ALL ORDERS ALL OVER UNITED STATES
Forespar SR-2 Jib Roller Sale!

Forespar SR-2 Jib Roller

$29.98 $59.95 (01 Customer Review)
Quick Overview

SR-2 Jib RollerThe Forespar SR-2 Jib Roller with fit shrouds from 3/16 thru 3/8 wire diameter.Use the proper size pair of insert liners according to the table below:3/8 wire use no insert5/16 wire use #1 inserts9/32 wire use #2 inserts wire use #3 inserts7

  • Satisfaction 100% Guaranteed
  • Free shipping on orders over $30
  • 60 day easy Return

SKU: CYWH31539865

Categories: ,

SR-2 Jib Roller

The Forespar SR-2 Jib Roller with fit shrouds from 3/16 thru 3/8 wire diameter.

Use the proper size pair of insert liners according to the table below:

  • 3/8 wire use no insert
  • 5/16 wire use #1 inserts
  • 9/32 wire use #2 inserts
  • wire use #3 inserts
  • 7/32 wire use #4 inserts
  • 3/16 wire use #5 inserts

The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswains chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).

Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape.

Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that dont have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.

Help the front sail to roll over the spreader to make the tacks smooth. Forespar jib rollers are designed to prevent larger headsails from hanging at the end of the spreader. Each jib roller can be fixed to… !!!!—-
PRODUCT ID: 68385
SKU: NVN-68385
CSKU: CWR-68385
REWRITE: 79496-forespar-sr-2-jib-roller
MPN: 210003
UPC: 028026121103
ASIN: B077ZQC6KR
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Forespar SR-2 Jib Roller
NAME_EX: FORESPAR SR-2 JIB ROLLER
PTITLE: Forespar SR-2 Jib Roller
TYPE: Sailing | Accessories
VENDOR: Forespar Performance Products
Google Category: VEHICLES & PARTS > VEHICLE PARTS & ACCESSORIES > WATERCRAFT PARTS & ACCESSORIES
Amazon Category: Sports
Amazon Title: FORESPAR Performance Products SR-2 Jib Roller
Google Title: Forespar SR-2 Jib Roller – 210003
Amazon Category: Sports
Gtags:

GSpecs:

Cost: $25
Free Shipping We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.
Delivery Time: It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.

Reviews

There are no reviews yet.

Be the first to review “Forespar SR-2 Jib Roller”

Your email address will not be published. Required fields are marked *