Airmar B175H Bronze Thru Hull 12 Tilt – 1kW – Requires Mix and Match Cable

1 kW

Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The high-frequency band delivers a narrow beamwidthexcellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. Transmitting across 130 to 210 kHz, the B175H has up to 80 kHz of total bandwidth in just one installation for superior shallow-water performance and bottom detail.

Tilted Element transducers have the element fixed at a 20, 12, or 0 angle within the housing. Because the transducer is installed almost flush to the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175H is available in three Tilted Element models:

• Fixed 20 tilted version for 16 to 24 hull deadrise angles
• Fixed 12 tilted version for 8 to 15 hull deadrise angles
• Fixed 0 tilted version for 0 to 7 hull deadrise angles

B175H Bronze Thru Hull 12 Tilt – 1kW

Requires Mix and Match Cable

B175H Bronze Thru Hull 20 degree Tilt 1KWRely on Airmars new broadband transducers for your ultimate fishing mission. Whether youre a commercial fisherman, charter captain, or tournament angler, theres a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000) with 5 to 10 times greater detail and resolution so precise its possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

• HighCHIRPS from 130 kHz to 210 kHz, 15 to 9 beamwidth
• 12 tilted version, 1KW
• 80 kHz of total bandwidth from one transducer
• Depth & fast-response water-temperature sensor
• Bronze transducer housing
• Boat Size: Up to 11 m (36)
• Hull Type: Fiberglass or wood
• Exclusive Xducer ID technology

The Airmar B175C high-frequency CHIRP sensor with a tilt of 12 degrees provides an excellent choice for fiberglass and wood hulls. The working frequency is 130-210 kHz; the beam width is 10 to 6 degrees; and it is designed for ships that are idling at 8 to 15 degrees. B175C can provide a total bandwidth of 80kHz through a single sensor. There is no connector for bare wire installation. !!!!—-
PRODUCT ID: 68021
SKU: NVN-68021
CSKU: CWR-68021
REWRITE: 79132-airmar-b175h-bronze-thru-hull-120-tilt
MPN: B175C-12-H-MM
UPC:
ASIN:
WSKU: AIRB175C12HMM
SSKU:
KSKU:
GSKU: B175C-12-H-MM
MSKU:
LSKU:
NAME: Airmar B175H Bronze Thru Hull 12 Tilt – 1kW – Requires Mix and Match Cable
NAME_EX: AIRMAR B175H 12 DEGREE CHIRP BRONE THRU HULL 1KW
PTITLE: Airmar B175H Bronze Thru Hull 12 Tilt – 1kW – Requires Mix and Match Cable
TYPE: Marine Navigation & Instruments | Transducers
VENDOR: Airmar
Google Category: ELECTRONICS > MARINE ELECTRONICS > FISH FINDERS
Amazon Category:
Amazon Title:
Google Title: Airmar B175C 12 Degree High Frequency CHIRP Thru-Hull Transducer Without Connector
Amazon Category:
Gtags:

GSpecs: