Maretron Submersible Pressure Transducer – 0 to 3 PSI

Maretron Fluid Pressure Sensor Transducers work with the Maretron FPM100 which will adapt up to six pressure Transducers to the NMEA 2000 network. Submersible Pressure Transducer – 0 to 3 PSI Used for tanks up to 80″ or 2M in depth. When used together with Maretron displays, alerts can be set so the user can be informed of low or high tank levels. And when not on-board the vessel, users can be notified through emails or text messages about their tank levels. Additionally, the tank levels can be stored using Maretron’s data recorder (VDR100) for later analysis.

Maretron pressure Transducers are not approved for use with gasoline. If you wish to use the FPM100 to monitor pressures or levels of gasoline, you must obtain a pressure Transducer that is approved for use with gasoline.

Maretron PTS03PSI01 Attributes

Submersible Pressure Transducer – 0 to 3 PSI

Used for tanks up to 80″ or 2M in depth

The submersible pressure transducers are used together with Maretron’s Fluid Pressure Monitor (FPM100), whichallows tank fluid level to be broadcast over an NMEA 2000 network where it can be monitored from any compatible NMEA 2000 display. When used together with Maretron displays, alerts can be set so the user can be informed of low or high tank levels. And when not on-board the vessel, users can be notified through emails or text messages about theirtank levels. Additionally, the tank levels can be stored using Maretron’s data recorder (VDR100) for later analysis.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Used for storage tanks whose depth does not exceed 80 inches or 2M. The submersible pressure sensor is used together with Maretron’s fluid pressure monitor (FPM100) to increase the liquid level of the tank to…

Electrical:

• Sensor Type: Gauge (Vent Tube)
• Output: 4 20 mA current loop, loop powered
• Excitation Voltage: 9 VDC to 32 VDC
• Compatible Fluids/Gases: Motor Oil, Diesel, Hydraulic Fluid, Water, Waste Water
• Operating Temperature: 14F to 158F (-10C to 70C)
• Ambient Temperature: 14F to 158F (-10C to 70C)
• Accuracy: 0.3% Full Scale typ. at 25C
• Total Error Band (TEB): 1.0% Full Scale typ. (-10C to 70C)
• Non-Linearity, Hysteresis (NLH): 0.2% Full Scale typ. Best Straight Line (BSL) at 25C
• Temperature Compensation Zero Point and Span: 0.04% Full Scale/F (0.02% Full Scale/C)
• Long Term Stability: 0.2% Full Scale typ. 1 year at 25C
• Rise Time: 1 ms typ. (10%-90% nominal pressure)
• Switch-On Delay: 100 ms
• Over Pressure: 15 PSI (1.03 bar)
• Burst Pressure: 30 PSI (2.07 bar)
• Vibration: 6 g (25 to 2000 Hz)
• Shock: 50 g / 8 ms
• Construction: AISI316L stainless steel housing, pressure connection; Ceramic, Al2O3 (96%) Sensor; FKM (FPM, Viton), EPDM (TPE) seals; PUR cable
• Minimum Cable Bend Radius: 1.57 (40 mm)
• EMC Compatibility: EN/IEC 61000-6-3 / GL 2012, IV, Part 7 (Emission and Immunity)
• Weight: 12.6 oz (357 g)

!!!!—-
PRODUCT ID: 59814
SKU: NVN-59814
CSKU: CWR-59814
REWRITE: 70925-maretron-submersible-pressure-transducer-0-to
MPN: PTS-0-3.0PSI-01
UPC: 873804003702
ASIN: B01BTHZBLK
WSKU:
SSKU: MRTN-PTS-0-3PSI-01
KSKU: MRTPTS03PSI01
GSKU: PTS-0-3-0PSI-01
MSKU:
LSKU:
NAME: Maretron Submersible Pressure Transducer – 0 to 3 PSI
NAME_EX: MARETRON SUBMERSIBLE PRESSURE TRANSDUCER 0 TO 3 PSI
PTITLE: Maretron Submersible Pressure Transducer – 0 to 3 PSI
TYPE: Marine Navigation & Instruments | NMEA Cables & Sensors
VENDOR: Maretron
Google Category: ELECTRONICS > MARINE ELECTRONICS > MARINE CHARTPLOTTERS & GPS
Amazon Category: CE
Amazon Title: Maretron PTS-0-3PSI-01 Submersible Pressure Transducer
Google Title: Maretron Submersible Pressure Transducer – 0 to 3 PSI
Amazon Category: CE
Gtags:

GSpecs: